Winch - Heavy - Worm Drive
The 125mmD cable drum holds 25 metres of 5mmD galvanised steel cable. An oil bath is provided for the gears. The winch is operated both up and down with moveable handle. Safe load capacity: 500kg. Drive options: - portable electric winch driver A16-13. - electric motor drive A16-551.
Winch - Light, Worm Drive
Similar to A16-11 with drum 100mmD, cable length 8 metres. Safe load capacity: 250kg.
Winch Driver - Portable Electric
Single phase 240volt, 720 watt 50 cycle. Up and down switch. Designed to operate winch A16-11 (max. load 250kg), and A16-12 (max. load 200kg). Adaptors FZ2-1, FZ2-2, A16-51 are provided. Economical system when several winches are used in one gymnasium.
Winch - Ratchet Removable Handle
Boat type ratchet winch with special large drum to reduce damage to cables.
Winch - Mechanical, Auto Brake
Ratchet type winch with over-ride brake. Winch must be wound up and down. Mounting bracket included. Winch must be checked periodically for wear and adjusted. Cable length: 7 metres. Safe load capacity: 300kg.
Winch Driver Adaptor For A16-11 & A16-12
Suits winch A16-11 and A16-12. For winch driver A16-13.
Winch - Electric 440 Volt 3 PhaseNo Switchgear Or Wiring
Three phase 0,35KW, 415volt, 50 cycle motor drives 125mmD cable drum through worm reduction unit. An oil bath is provided for the gears. Limit switches control the up and down movement. Customer to provide electrical wiring, switchgear and key-operated control switch. This must be fitted by an approved electrician. Lift: 14 metres max. Safe load capacity: 350kg.
Winch Motor Drive, Electric Single PhaseFor A16-11 & A16-12
Single phase 0.65KW 240volt motor, gearbox and switchgear permanently fitted to winch A16-11 (max. load 200kg), or A16-12 (max. load 150kg). Key-operated switch and limit switches control the up and down movement. Customer to provide 240volt single phase power outlet only at winch location.
Winch Remote Control For A16-52Factory Fitted
Cordless remote system is factory fitted to the winch. Customer to provide 415volt three phase power outlet only at winch location.
Winch Remote Control SwitchgearSingle Pahse, For A16-52 Winch
Cordless remote system is factory fitted to the winch. Customer to provide 240volt single pahse power outlet only at winch location.
Winch - Electric Single PhaseNo Switchgear Or Wiring
Used when three pahse power is not available. Similar to A16-52 but with single pahse 0.75KW, 240volt motor. Customer to provide electrical wiring, switchgear and key operated control switch. This must be fitted by an approved elctrician.
Tensioner - Linear 215mm Travel
The handle is operated for tensioning and releasing the load. Used where minimum travel and continuous adjustment are required. Maximum travel: 215mm. Safe load capacity: 280kg.
Acromat Volleyball Winch Handle
Adaptor - Hexagonal 3/8" Sq. DriveFor Adaptor A16-51
For winch driver A16-13.
Socket 5/8" AF For Adaptor A16-51
Wingnut for Winch Handle
010625.verity not found